dmesg - 2013-11-15 20:14
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-56-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #86-Ubuntu SMP Wed Oct 23 17:31:43 UTC 2013 (Ubuntu 3.2.0-56.86-generic 3.2.51)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU!
NX (Execute Disable) protection: approximated by x86 segment limits
SMBIOS 2.3 present.
DMI: System Manufacturer System Name/A7V8X, BIOS ASUS A7V8X ACPI BIOS Revision 1014 04/21/2004
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3fffc max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 base 0F8000000 mask FFC000000 write-combining
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01c00000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 1bf8000-1c00000
RAMDISK: 364da000 - 37265000
ACPI: RSDP 000f6140 00014 (v00 ASUS )
ACPI: RSDT 3fffc000 00030 (v01 ASUS A7V8X 42302E31 MSFT 31313031)
ACPI: FACP 3fffc0b2 00074 (v01 ASUS A7V8X 42302E31 MSFT 31313031)
ACPI: DSDT 3fffc126 0283E (v01 ASUS A7V8X 00001000 MSFT 0100000B)
ACPI: FACS 3ffff000 00040
ACPI: BOOT 3fffc030 00028 (v01 ASUS A7V8X 42302E31 MSFT 31313031)
ACPI: APIC 3fffc058 0005A (v01 ASUS A7V8X 42302E31 MSFT 31313031)
ACPI: Local APIC address 0xfee00000
135MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003fffc
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003fffc
On node 0 totalpages: 262027
free_area_init_node: node 0, pgdat c182bd80, node_mem_map f5cda200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 272 pages used for memmap
HighMem zone: 34542 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @f77e9000 s31616 r0 d21632 u53248
pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259979
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 4193984 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:0003fffc)
Memory: 1011016k/1048560k available (5637k kernel code, 37092k reserved, 2779k data, 716k init, 139256k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1839000 - 0xc18ec000 ( 716 kB)
.data : 0xc1581784 - 0xc18384c0 (2779 kB)
.text : 0xc1000000 - 0xc1581784 (5637 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:256 16
CPU 0 irqstacks, hard=f5808000 soft=f580a000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1658.563 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3317.12 BogoMIPS (lpj=6634252)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
mce: CPU supports 4 MCE banks
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20110623
ftrace: allocating 25521 entries in 50 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(TM) XP 2000+ stepping 00
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 1 CPUs
Total of 1 processors activated (3317.12 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at 3ffff000 (4096 bytes)
print_constraints: dummy:
RTC time: 8:19:10, date: 11/12/13
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1ad0, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
pci 0000:00:00.0: [1106:3189] type 0 class 0x000600
pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
pci 0000:00:01.0: [1106:b168] type 1 class 0x000604
pci 0000:00:01.0: supports D1
pci 0000:00:09.0: [14e4:4401] type 0 class 0x000200
pci 0000:00:09.0: reg 10: [mem 0xde000000-0xde001fff]
pci 0000:00:09.0: reg 30: [mem 0xdfff0000-0xdfff3fff pref]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.0: reg 20: [io 0xb800-0xb81f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.1: reg 20: [io 0xb400-0xb41f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.2: reg 20: [io 0xb000-0xb01f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: [1106:3104] type 0 class 0x000c03
pci 0000:00:10.3: reg 10: [mem 0xdd800000-0xdd8000ff]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:11.0: [1106:3177] type 0 class 0x000601
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.0: quirk: [io 0xe400-0xe47f] claimed by vt8235 PM
pci 0000:00:11.0: quirk: [io 0xe800-0xe80f] claimed by vt8235 SMB
pci 0000:00:11.1: [1106:0571] type 0 class 0x000101
pci 0000:00:11.1: reg 20: [io 0xa800-0xa80f]
pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
pci 0000:00:11.5: reg 10: [io 0xe000-0xe0ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:01:00.0: [1002:4966] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:01:00.0: reg 14: [io 0xd800-0xd8ff]
pci 0000:01:00.0: reg 18: [mem 0xdf000000-0xdf00ffff]
pci 0000:01:00.0: reg 30: [mem 0xeffe0000-0xefffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:496e] type 0 class 0x000380
pci 0000:01:00.1: reg 10: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:01:00.1: reg 14: [mem 0xde800000-0xde80ffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xde800000-0xdfefffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 32 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000003fffc000 - 000000003fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000f0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0x3fffffff]
pnp 00:00: [mem 0xfec00000-0xfec000ff]
pnp 00:00: [mem 0xfee00000-0xfee00fff]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x3fffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec000ff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c8000-0x000dffff window]
pnp 00:01: [mem 0x40000000-0xfebfffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io 0xe400-0xe47f]
pnp 00:02: [io 0xe800-0xe81f]
pnp 00:02: [mem 0xfff80000-0xffffffff]
pnp 00:02: [mem 0xffb80000-0xffbfffff]
system 00:02: [io 0xe400-0xe47f] has been reserved
system 00:02: [io 0xe800-0xe81f] could not be reserved
system 00:02: [mem 0xfff80000-0xffffffff] could not be reserved
system 00:02: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0010-0x001f]
pnp 00:03: [io 0x0022-0x002d]
pnp 00:03: [io 0x0030-0x003f]
pnp 00:03: [io 0x0044-0x005f]
pnp 00:03: [io 0x0062-0x0063]
pnp 00:03: [io 0x0065-0x006f]
pnp 00:03: [io 0x0074-0x007f]
pnp 00:03: [io 0x0091-0x0093]
pnp 00:03: [io 0x00a2-0x00bf]
pnp 00:03: [io 0x00e0-0x00ef]
pnp 00:03: [io 0x04d0-0x04d1]
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x0090]
pnp 00:04: [io 0x0094-0x009f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x03f2-0x03f5]
pnp 00:08: [io 0x03f7]
pnp 00:08: [irq 6]
pnp 00:08: [dma 2]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:09: [io 0x0378-0x037f]
pnp 00:09: [io 0x0778-0x077b]
pnp 00:09: [irq 7]
pnp 00:09: [dma 3]
pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0a: [io 0x03f8-0x03ff]
pnp 00:0a: [irq 4]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [io 0x02f8-0x02ff]
pnp 00:0b: [irq 3]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [io 0x0060]
pnp 00:0c: [io 0x0064]
pnp 00:0c: [irq 1]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0d: [irq 12]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0e: [io 0x0200-0x0207]
pnp 00:0e: Plug and Play ACPI device, IDs PNPb02f (active)
pnp 00:0f: [io 0x002e-0x002f]
pnp 00:0f: [io 0x0290-0x0291]
pnp 00:0f: [io 0x0370-0x0372]
system 00:0f: [io 0x0290-0x0291] has been reserved
system 00:0f: [io 0x0370-0x0372] has been reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
Switching to clocksource acpi_pm
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xde800000-0xdfefffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xde800000-0xdfefffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf7ffffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.0: PCI INT A disabled
pci 0000:00:10.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.1: PCI INT B disabled
pci 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.2: PCI INT C disabled
pci 0000:00:10.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.3: PCI INT D disabled
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 32
Simple Boot Flag at 0x3a set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1384244349.148:1): initialized
Trying to unpack rootfs image as initramfs...
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1702
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
isapnp: Scanning for PnP cards...
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
brd: module loaded
loop: module loaded
pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:10.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 21, io mem 0xdd800000
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
isapnp: No Plug & Play device found
Freeing initrd memory: 13868k freed
Refined TSC clocksource calibration: 1658.522 MHz.
Switching to clocksource tsc
Magic number: 5:51:321
tty tty46: hash matches
rtc_cmos 00:05: setting system clock to 2013-11-12 08:19:11 UTC (1384244351)
powernow-k8: Processor cpuid 680 not supported
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 716k freed
Write protecting the kernel text: 5640k
Write protecting the kernel read-only data: 2332k
udevd[79]: starting version 175
Floppy drive(s): fd0 is 1.44M
b44 0000:00:09.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
FDC 0 is a post-1991 82077
ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243)
ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243)
ssb: Sonics Silicon Backplane found on PCI device 0000:00:09.0
b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
pata_via 0000:00:11.1: version 0.3.4
pata_via 0000:00:11.1: can't derive routing for PCI INT A
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa800 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa808 irq 15
b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:e0:18:aa:ee:21
ata1.00: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKB-0 05.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.01: ATAPI: HL-DT-ST GCE-8481B, 1.02, max UDMA/33
ata2.01: configured for UDMA/33
scsi 1:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8481B 1.02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sr 1:0:1:0: Attached scsi generic sg1 type 5
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 1046524k swap on /dev/sda5. Priority:-1 extents:1 across:1046524k
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[347]: starting version 175
lp: driver loaded but no devices found
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
irda_init()
NET: Registered protocol family 23
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
gameport gameport0: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x200, speed 1125kHz
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
psmouse serio1: hgpk: ID: 10 00 64
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] initializing kernel modesetting (RV250 0x1002:0x4966 0x148C:0x2039).
[drm] register mmio base: 0xDF000000
[drm] register mmio size: 65536
agpgart-via 0000:00:00.0: AGP 2.0 bridge
agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
radeon 0000:01:00.0: putting AGP V2 device into 4x mode
pci 0000:01:00.1: putting AGP V2 device into 4x mode
radeon 0000:01:00.0: GTT: 64M 0xF8000000 - 0xFBFFFFFF
[drm] Generation 1 PCI interface in multifunction mode
[drm] Limiting VRAM to one aperture
radeon 0000:01:00.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (128M used)
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 443184 kiB.
[TTM] Zone highmem: Available graphics memory: 512812 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 64M of GTT memory ready.
radeon 0000:01:00.0: WB disabled
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R200 Microcode
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
type=1400 audit(1384244361.098:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=587 comm="apparmor_parser"
type=1400 audit(1384244361.098:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=587 comm="apparmor_parser"
type=1400 audit(1384244361.098:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=587 comm="apparmor_parser"
type=1400 audit(1384244361.098:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=585 comm="apparmor_parser"
type=1400 audit(1384244361.098:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=585 comm="apparmor_parser"
type=1400 audit(1384244361.098:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=585 comm="apparmor_parser"
[drm] radeon: ring at 0x00000000F8001000
[drm] ring test succeeded in 0 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] No TV DAC info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
[drm] DFP1: INTERNAL_TMDS1
[drm] Connector 2:
[drm] S-video
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
[drm] fb mappable at 0xF0040000
[drm] vram apper at 0xF0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
snd_via82xx 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
snd_via82xx 0000:00:11.5: setting latency timer to 64
init: gdm main process (698) killed by TERM signal
init: failsafe main process (638) killed by TERM signal
type=1400 audit(1384244363.698:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=716 comm="apparmor_parser"
type=1400 audit(1384244363.702:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=716 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1384244369.286:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=805 comm="apparmor_parser"
type=1400 audit(1384244369.434:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=806 comm="apparmor_parser"
type=1400 audit(1384244369.434:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=806 comm="apparmor_parser"
type=1400 audit(1384244369.442:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=810 comm="apparmor_parser"
type=1400 audit(1384244369.442:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=810 comm="apparmor_parser"
type=1400 audit(1384244369.442:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=810 comm="apparmor_parser"
type=1400 audit(1384244369.766:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=811 comm="apparmor_parser"
type=1400 audit(1384244369.778:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=811 comm="apparmor_parser"
type=1400 audit(1384244369.782:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=811 comm="apparmor_parser"
type=1400 audit(1384244369.786:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=811 comm="apparmor_parser"
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
b44 ssb0:0: eth0: Flow control is off for TX and off for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
b44 ssb0:0: eth0: powering down PHY
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
b44 ssb0:0: eth0: Flow control is off for TX and off for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-stop pre-start process (1676) terminated with status 1
CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
eth0: no IPv6 routers present